Integrated Circuit Holder - Holds 40 8-pin ICs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple case I made to hold ICs. It holds up to 40 8-pin ICs, and I made dividers so that you can organize…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a simple case I made to hold ICs. It holds up to 40 8-pin ICs, and I made dividers so that you can organize them. I made it flimsy so that it will use as little plastic as possible.
Print Settings
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
0.3mm Nozzle/0.1mm Layer
Infill:
25%
Notes:
Printed the first layer at 25% speed, 205C with 200% extrusion width, 0.3mm thickness. The rest of the layers were 0.1mm with normal extrusion at 200C. I used white PLA. Nothing fancy required for this print.
I used 3DS max to design this. I based it off of the clear plastic W shaped containers that you get bulk ICs in.
Category: Tool Holders & Boxes