Integrated Circuit Holder - Holds 40 8-pin ICs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple case I made to hold ICs. It holds up to 40 8-pin ICs, and I made dividers so that you can organize…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a simple case I made to hold ICs. It holds up to 40 8-pin ICs, and I made dividers so that you can organize them. I made it flimsy so that it will use as little plastic as possible.
Print Settings
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
0.3mm Nozzle/0.1mm Layer
Infill:
25%
Notes:
Printed the first layer at 25% speed, 205C with 200% extrusion width, 0.3mm thickness. The rest of the layers were 0.1mm with normal extrusion at 200C. I used white PLA. Nothing fancy required for this print.
I used 3DS max to design this. I based it off of the clear plastic W shaped containers that you get bulk ICs in.
Category: Tool Holders & Boxes