1 / 1
2.45" (60 mm) Shop Vacuum Hose Clamp with Arms
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple clamp to keep your shop vac hose organized.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
A clamp designed for a 2.45" (60 mm) diameter vacuum hoses.
Two versions:
Flexible (shown in photo). Easy to pop on and off. Just enough to hold a hose wrapped around the vacuum, for example.
Stiff for more holding force. It's thicker and slightly taller.
I don't recommend printing this in PLA. The fillets are there for comfort, but do not lend this part to printing with a plastic that warps easy during printing (e.g. PLA). Also, PLA succumbs to creep easily, so it won't retain the same shape over time under load. PETG works great.