Table Edge Backpack Hook (18 mm Table Thickness)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a compact and sturdy table edge hook designed to hang backpacks, bags, or other items safely under a table or de
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 262
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a compact and sturdy table edge hook designed to hang backpacks, bags, or other items safely under a table or desk. It slides onto the table edge and provides a smooth lower hook where a strap or handle can rest, keeping your bag off the floor and within easy reach.
The design is optimized for tables with 18 mm thickness, offering a snug fit without the need for screws, clamps, or adhesives. Rounded contact surfaces help avoid damage to the table and reduce stress concentrations in the print.
Features
Designed specifically for 18 mm thick table tops
Keeps backpacks and bags off the floor
One-piece print, no assembly required
Smooth, rounded geometry for strength and durability
Easy to attach and remove
Works with straps, handles, or carabiners
Recommended Print Settings
Material: PLA, PETG, or ABS
(PETG recommended for better toughness and temperature resistance)Layer height: 0.16–0.28 mm
Infill: 20–35% (gyroid or cubic recommended)
Perimeters: 3–4
Supports: Not required
Print orientation: As shown in the photos (table contact surface flat on the bed)
Load Disclaimer
This hook is intended for everyday backpacks and bags. Maximum load depends on print settings, material, and print quality. Use at your own risk and avoid excessive dynamic loads.
If you need a version for a different table thickness, the model can be easily scaled or adjusted.