1 / 5
[RE-RE-REMIX] Unifi UCG-Max 10-inch rack mount w. 3 keystones — zdjęcie 1
1 / 5

[RE-RE-REMIX] Unifi UCG-Max 10-inch rack mount w. 3 keystones

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Changed hole pattern to rhombus for more optimal printing. Reduced lip size for keystones.

Ocena
0 / 5
Polubienia
12
Pobrania
67
Wydruki
0
Wyświetlenia
397
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

[UPDATE 15-12-2025]: I'm now unsure where I got the original 3-keystone model from... My initial remix is based on Mauker's design with an open front and 3-keystones, but I actually like Andreq's version with a closed front better.

I've added a closed front version with rhombus-pattern and 2x4 mm holes to secure the UCG-Max with i.e. two M4x40 machine screws.

[ORIGINAL Upload]: Original hole pattern was hexagons oriented in the least optimal position. I printed Maukers USW-Flex rack mount and it broke due to the weak connection in the top of the hexagons. I've since learned that IF one should print hexagons in a vertical configuration the top of the hexagon should be horizontal as the angles of a hexagon are 120°(/60° ) which is above the comfortable threashold of FDM 3D-printers.

Therefor I changed the pattern to rhombus' to enable 45° vertical angles which is a lot easier for the printer.

I also changed the lip depth for the three keystones as the “big” lip made it impossible to install the keystones I were using. The lips are now 2 mm and 2,5 mm respectively and supports these two types of keystones:
https://www.amazon.de/-/en/dp/B0038SVPTG?th=1
https://www.amazon.de/-/en/dp/B004RPEJII?th=1

Tagi