[RE-RE-REMIX] Unifi UCG-Max 10-inch rack mount w. 3 keystones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Changed hole pattern to rhombus for more optimal printing. Reduced lip size for keystones.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 67
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[UPDATE 15-12-2025]: I'm now unsure where I got the original 3-keystone model from... My initial remix is based on Mauker's design with an open front and 3-keystones, but I actually like Andreq's version with a closed front better.
I've added a closed front version with rhombus-pattern and 2x4 mm holes to secure the UCG-Max with i.e. two M4x40 machine screws.
[ORIGINAL Upload]: Original hole pattern was hexagons oriented in the least optimal position. I printed Maukers USW-Flex rack mount and it broke due to the weak connection in the top of the hexagons. I've since learned that IF one should print hexagons in a vertical configuration the top of the hexagon should be horizontal as the angles of a hexagon are 120°(/60° ) which is above the comfortable threashold of FDM 3D-printers.
Therefor I changed the pattern to rhombus' to enable 45° vertical angles which is a lot easier for the printer.
I also changed the lip depth for the three keystones as the “big” lip made it impossible to install the keystones I were using. The lips are now 2 mm and 2,5 mm respectively and supports these two types of keystones:
https://www.amazon.de/-/en/dp/B0038SVPTG?th=1
https://www.amazon.de/-/en/dp/B004RPEJII?th=1