Quanum Vandal LRP Blast Wing Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purchased a LRP Blast 2 Canopy and Wing from ebay and adapted both to my Quanum Vandal. Mount Holes from the Blast…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Purchased a LRP Blast 2 Canopy and Wing from ebay and adapted both to my Quanum Vandal. Mount Holes from the Blast Wing are wider compared to the Vandal. Blast Wing is also thinner, so cut off a few Millimeter from the mounting Pin. Print horizontal for strength.
EDIT: Printed my own wing which has more thickness than the LRP one. Adjusted holes in Version 2. You can find the Wing here: https://www.thingiverse.com/thing:4771812
EDIT2:
Had to print this again and realized, that the last version was bit faulty. So fixed this in V3 and I also recommend to print this in flexible filament like TPU.
Print Settings
Printer:
Sidewinder X1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15
Infill:
100%
Category: R/C Vehicles