Quanum Vandal LRP Blast Wing Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Purchased a LRP Blast 2 Canopy and Wing from ebay and adapted both to my Quanum Vandal. Mount Holes from the Blast…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Purchased a LRP Blast 2 Canopy and Wing from ebay and adapted both to my Quanum Vandal. Mount Holes from the Blast Wing are wider compared to the Vandal. Blast Wing is also thinner, so cut off a few Millimeter from the mounting Pin. Print horizontal for strength.
EDIT: Printed my own wing which has more thickness than the LRP one. Adjusted holes in Version 2. You can find the Wing here: https://www.thingiverse.com/thing:4771812
EDIT2:
Had to print this again and realized, that the last version was bit faulty. So fixed this in V3 and I also recommend to print this in flexible filament like TPU.
Print Settings
Printer:
Sidewinder X1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15
Infill:
100%
Category: R/C Vehicles