Divesoft Freedom Loop Hanger (Sidemount CCR) – Drying / Storage Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact hanger for Divesoft Freedom CCR loop: drying after dives, safe storage, and tidy gear display.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Divesoft Freedom Loop Hanger (Sidemount CCR)
This hanger is designed to hold the Divesoft Freedom breathing loop for drying, storage, and display. After a dive, hang the loop so water can drain and the loop doesn’t end up kinked, squashed in a box, or living its best life on the floor.
Features
Simple, sturdy hook-style hanger for the Freedom loop
Helps keep the loop open and organized while drying
Compact shape — easy to keep in the workshop / dive room
Printing recommendations (FDM)
Material: PETG recommended (tough + moisture-friendly). PLA works for indoor display but is least durable long-term.
Layer height: i did 0.42 but use safe max for your machine
Walls/perimeters: 3–4
Infill: 20–35% (gyroid/grid)
Supports: None (if your orientation matches the model design)
Brim: optional if you have bed-adhesion issues
Orientation
Print in the orientation from the provided 3MF/STL.
Notes / safety
This is a gear accessory (drying/storage), not life-support equipment. Inspect prints for cracks, especially if you use it in cold environments or with heavy wet gear.
Changelog
v1.0 – Initial release