Liczymy pasujące modele…
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
One of the frequent complaints about the Meade ETX series is that the finder scopes are virtually impossible to use because of how close the standard mount is to the eyepiece and the barrel of the scope. This mount fixes that. First,…
A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…
Moved the heatset inserts to the other side to be less likely to pull out.
choose "supports everywhere" as support for the hooks mount with m4 locknuts to the profiles
Shout out to Ernesto Pineda for his original design which is a simple fix to the CoreXZ filament tangle issue, without throwing extra weight on the gantry. Original design can be found on Printables at…
Simple mount for the ultimaker 2+. Unlike the normal mount, this can be used to install the "Filler" on the side of the ultimaker2+ enclosure.
Remix of the 71828-sidemount-break-away-connector. As it was too weak to hold my tube, I enforced the design to increased the grip of the spare respirator. Printed with Mini+ Infill: 50% Eryone TPU
Description An outside hinge for you to use. This is meant to be mounted on the outside of a cabinet. There is a left side hinge set and a right side hinge set. Print Instructions Since it needs to take some weight I suggest printing in…
This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting the twist locking disk onto it. Apparently also compatible with Google Nest 2nd Gen indoor camera's, they have the same…
This Sidemount uses the original sovol Spoolholder to relocate the spool to the front right side of the printer. There is also a version for M3 heatinserts. It fits on the Zero's 152x152 buildplate if rotated 45°. To mount, remove the…
🔌 Power Rack Vertical Sidemount – Take Back Your U-Space Stop wasting precious U-slots on a clunky power strip and cable management. The Power Rack Vertical Sidemount is your solution to clean, efficient, side-mounted power and cable…
A mount for using a 10.9 inch iPad at the side of a printer, including Ratrig V-Core3 and V-Core4. The mount attaches to the vertical extrusions with a single M6, and the tilt can be adjusted. As the fixing point is near the center of…
This is a pull tab that can be threaded through a 6mm bungee for assisting in pulling the bungees over your sidemount tank valves when using bulky dry gloves Printing Instructions Filament: TPU 95A Infill: 100% Support: None Brim: None
There's not any side way mount for BMG. The normal rear mount did not have enough clearance for CR-10 chassis and front mount is a pain to dissemble without removing the whole printer from enclosure. Side way mount it is.
A Rack to mount the Short Hose of the SM to dry after a Dive
Print as oriented. Uses 2 M4x8 BHCS to mount to the extrusion Sensorless version of https://www.printables.com/model/1313705-neptune-4-ubbi-filament-guide-with-sensor Submit feature requests here!
I wanted to have a changeable tool tray option and had a first stab at Tinkercad. I ended up liking the outcome more than I thought, so maybe someone else likes it too and wants to save some time designing it manually. The model is 160mm…
Simple Sidemount for the IFlight SL5 V2.1 Frame, all Revisions as of Upload Date. Can be used on any Frame with 20mm Standoffs. I recommend routing the Power Cables infront of the Standoff so it gets pulled inwards by the power cables.…
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
One of the frequent complaints about the Meade ETX series is that the finder scopes are virtually impossible to use because of how close the standard mount is to the eyepiece and the barrel of the scope. This mount fixes that. First,…
Small Filament guide if you spool ist not directly mounted below the extruder. Based on this filament roller guide: https://www.thingiverse.com/thing:3052488 It uses the same bearing and spacers. I had to mount my spool sidemount in the…
Although this part isn’t strictly necessary, I wanted a cover to make my modified toolhead look more like the original. After being unable to find one already made I decided to open up Fusion and have a go myself. Since I was quite happy…
Divesoft Freedom Loop Hanger (Sidemount CCR) This hanger is designed to hold the Divesoft Freedom breathing loop for drying, storage, and display . After a dive, hang the loop so water can drain and the loop doesn’t end up kinked,…
A simple shelf for mounting on side of something. I put it on a cabinet in the bathroom. 180mm wide x 200mm deep.
in my opinion this holder ( the original one) is the best one to be found in the internet ! Well done. But when I was using it, the autohoming fails when the Laserhead is too low. Reason: The holder reaches the front frame before the head…
M5 10mm bolt x 2 M5 T nut x 2 M5 8mm bolt x 2 M5 hex nut x 2 Category: 3D Printer Parts
Remix of @AlexB_524533's excellent Dual 4020 fan ducts for 4015 fans. I flipped the model 90 degrees in my slicer, cut off both scoops just next to the intake and scaled that down to 75% to take it from 20mm wide to 15mm wide. Carefully…
I wanted a mount for my Google mini that protuded as little as possible from the wall so I turned the cable management of the mount made by Carljam ( https://www.thingiverse.com/thing:3471944 ) around and placed it on the back. Then added…
Original and Idea by @boltsnap_292875 - just edited for a 8mm Version. This is a pull tab that can be threaded through a 8mm bungee for assisting in pulling the bungees over your sidemount tank valves when using bulky dry gloves Printing…
A quick release buckle for your BCD or Tec/Sidemount Harness. This buckle offers a low-profile design that reduces bulk while maximizing security. It’s precise locking mechanism ensures that once you’re clipped in, you stay in, making it…
Loved Adrenaline's design of the side mount spool holder but for my application I couldn't get it to fit in solidly enough in the channels to be stable so I redesigned it to accept some socket head screws and channel nuts. Required: M3 x…
Moved the heatset inserts to the other side to be less likely to pull out.
i wanted to make a trashcan for failed prints and supports that i was able to mount to the side of a cabinet or a wall. You can choose between a 15cm tall version or a 7,5mm tall version and eitehr mounting with doublesided tape or bolts…
Redesigned with ventilation holes and Button in option
This thing allows to mount a 3D-Touch bed leveling sensor to the side of the printhead. It fixes two major issues I had with other mounts: It does not collide with the frame when moving the Z-gantry all the way up. It avoids long levers…
This clip holds your regulator securely to your harness when not in use for breathing. In an emergency, you can simply pull the regulator off without fumbling or breaking anything. To have the right amount of pull off force I used this…
Befestigung für den E3D Titanhextruder um ihn seitlich an einem 3030 Profil zu befestigen. V1.1: Löcher zur Befestigung verschoben, damit auch "normalgroße" Nema17 passen. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution:…
Holder to mount a Philips hue bridge in a network rack mount (sideways).
I modeled this file, because I couldn't find anything like it. It allows you to sidemount the ender 3 v2 lcd display and uses the screws and t-nuts included with the original mount. The model might need slight support and I recommend…
Update: Revision 8 - (R8/R8-Solid model in printable files): Hex edge thickness increased to improve stability and printability Solid version included (easier to print than hex, slightly heavier) Slightly adjusted vent angles. Improved…
The 75mm long picatinny rail (dimensions according MIL-STD-1913) is 15mm high to fit on the side of the Stinger 2 magazine body. This height is ideal to fit the arrow quiver right next to the magazine for quick reloading. The 40mm hole…
Extended the mounting system to reduce or eliminate twisting of the spool arm Category: 3D Printer Accessories
My old ender 3 s1 had a much better spool holder than the x1c weirdly enough, so i decided to use the roller from that machine and add it to the x1c. Also mounted sideways cause it's objectively better.
This sidemounted Spoolholder for the Bambulab X1C is remixed for Compatibility with an AMS. It uses the original mounting Hardware, as well as the Spool Roller of an Ender 3 S1/S1 Pro. I added a cutout for the AMS connector cable, as I…
Simple mount for Ender 3 and other printers to hold Case for Osoyoo 5" Touch Case: https://www.printables.com/de/model/510659-case-for-osoyoo-5-touch-screen-newer-version You just nust need 2 pcs M3x6 mm screws and 2 pcs M3 T-nuts.…
Spool holder for the Ender 3 Extrusion that attaches to the side of the extrusion - to make space for a cable chain for example. It uses the screws & t-nuts from the Ender 3 spool mount - no additional screws required. I included the…
I printed the original but found it flexed too much under hand when being pressed, so I added a couple of support pillars to give rigidity. Prints nicely with 30% infill and will need supports. Align short end towards the bed.
Wanted a side mounted case for the E3EZ with enough free space for cable management. Added the logo from here: https://www.printables.com/de/model/500230-bigtreetech-manta-logo Printed in PETG with 4 walls and 15% infill. For mcu fan a…
Original Upload by https://www.thingiverse.com/_iw0gz_ A project of the Proteo Explorer Team https://www.facebook.com/proteoteam/ CCR Liberty SideMount Counterlungs Dryer Additional parts required are: 40mm Fan (std 40mm) - USB driven…
easy and simple so that you can mount the original holder on the side of the enclosure
Print this bitholder with TPU stock settings prefferably pretty light on the number off walls and infill. you can mount it to the side using an 4mm hex bolt with a cilinder head on it. Does not fit both sides but you can mirror it if you…
PETG or ABS recommended for outdoor application. Mount the unifi with the cable coming out the side
Low Profile Spoolholder for sidemounting to the bambulab AMS. With the bowdenconnector it adds just 34mm to the AMS in width. Fits spools from 140 to 200mm diameter. Never unplug the AMS again when printing from an external spool.…
This is a quick remix which rotates the locator pins 90 degrees
It is what the rest said. Got tired of misplacing the gluestick and scraper. Remixed a runout sensor to not lose them again. Mounted with m3x12 screws, with 2 m3x7x1mm washers. Yeah can use 10mm screws, but one didn't wanna screw in right…
Sidemount for LCD Display of a Prusa I3 MK3s+ More Space in the Frontend and better Handling. Required parts: 2x M3x12 2x M3x16 2x M3 nuts
When sidemount one usually applies a break away connector made out of a self locking cable zip tie and a piece of rubber o-ring to ensure that the redactor can be handed over quickly in an out-of-air situation. Although this is a very…
This is a Breakaway Connector used for the longhose when sidemount diving. Attach a boltsnap and clip it onto the hose-c
This one has a bit wider 4040 foot than the original one for the extra stability. Category: 3D Printer Parts
In sidemount diving, we attach the long hose's second stage regulator to the right shoulder D-ring using a small snap-bolt. Relying on permanent fixtures such as nylon lines would deprive the diver from detaching the long hose fast when…
Introduction: This is a redesign of the spoolholder for the Creality K1C that creality provides. This design innately uses more walls and less infill. This provides better strength and uses the same amount of material as the original one.…
The XL does not like filament unless it is super dry. Leaving the spools exposed on the side while you print is not a good way to get successful prints, so I made this attachment for Dry Boxes. Print with the magnet side down. Use Snug…
Introduction This is a sidemount for the BTT SFS 1.0 that works for the Creality K1/K1C and moves the sensor to a more accessible position to the side of the printer. With the new smart filament sensor you can detect clogs and prevent…
Sidemount for SHH Thorn. Uses 6 or 8 m4x8mm screws for shifter side and 2 m8x16mm for rig side.
Use the thin nut that comes with the antenna to pull the lower hex part into its place (3rd picture). Printed it with PET-G, 0,2 mm layer height, 15% infill. You will need to push the grate aside a bit with a screwdriver or something to…
The stls are organized below in what you will need for a left vs right mounting. You will need to drill a small hole in the plexiglass sidewall where you choose to mount the PSU. The updated screw lengths going through the wire channels…
