Spool holder with top mounting for Sovol SV06ACE/PLUS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spool holder with a mount for the Sovol Sv06 Ace/Plus
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the spool holder for the Sovol Sv06 ace / plus was too free.running and my filament got tangled, I've designed a new spool holder that makes it easy to unroll the filament without it getting tangled. All you need are 4 x 623ZZ ball bearings, the rest can be easily printed out. The original screws from the Sovol Sv06 Ace / plus are used.
I would recommend PETG / PETG CF or similar as the material for the printed parts.
For the print settings, 3 walls and 15% infill should be sufficient.
The spools can have a width of <104mm
Instructions on makerworld: https://makerworld.com/de/models/2110792-spool-holder-with-top-mount-for-sovol-sv06ace-plus