Simple Raspberry Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and plain raspberry with a hole for attaching it as keychain. Alternative version with outlines only included.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A simple and plain raspberry with a hole for attaching it as keychain. The outlines are painted with a permanent marker, but may be printed with a MMU/AMS setup or manual change of filament (M600), too.
There are two different versions:
Raspberry-Solid: a solid raspberry with raised outlines
Raspberry-Borders-Only: a perforated version without eye
The raspberry was created with Inkscape as a SVG-file. I exported the two layers as separate DXF-files, which are used in OpenScad for linear extrusion. Maybe you prefer working with the sources...
Suggested print settings
Rafts: No
Supports: No
Resolution: 0.2mm layer thickness
Infill: 20%
Instructions
Raspberry-Solid
Slice model and print raspberries in desired quantity.
Optional: Use a permanent marker to highlight the borders, swap the filament mid-print or use a multicolor printer.
Use attached hole for mounting it to a keyring, etc.
Enjoy your raspberry keychain 😉
Raspberry-Borders-Only
Slice model and print raspberries in desired quantity.
Use a thread or glue for mounting your raspberries.