PlantMate - Long-life watering system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model can be screwed onto a standard PET bottle and will water your plants for weeks while you are on holiday.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Printing instructions: I used PLA for printing. No support structure needed. Just align the tip of the cap with your printer bed.
Working Instructions: The bottle cap becomes watertight when you screw it on with a little force. I designed a tiny hole in it so that water drips out very slowly. At first, it may look as if no water is coming out, but that means everything is working correctly. Your plant will receive just the right amount of water if you leave the cap inside the flower pot long enough. This system saved my plant when I was away from home for three weeks!