1 / 2
V-Minion 1.1 Dual-rail Z-Topcap — zdjęcie 1
1 / 2

V-Minion 1.1 Dual-rail Z-Topcap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for the Z top cap on a Ratrig V-Minion 1.1 running the MGN15-MGN12 dual-rail mod. Not for the dual MGN15.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The 1.0 Z-top for this dual-rail mod does not fit on the 1.1 version of the printer due to the position of the leadscrew. For this model I took the top cap in the Ratrig V-Minion 1.1 CAD and cut off the side that would hit the side rail.

There are at least two folders here - the Basic is unimproved at all, it just takes the original part, cuts off the sides, restores some chamfers.

Other folders will have version with logos and maybe modifications to improve the aesthetics.

Tagi