Wall register vent cover diffuser for 6" vent duct pipe - single piece print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 6" duct vent for intake or exhaust. Two models, one with holes in the flange and one with a solid flange
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm installing a whole house ventilation system and needed 6" duct grilles for my intake and exhaust. A 6" flex duct should easily slip over and attach, and a crimped end of a solid metal pipe should easily slip in.
I like the look of these 3d printed models so much better than the commercially available metal ones! The vent will fit in a 160mm square hole. The flange is 200 mm square. I like the solid flange because it looks cleaner, but I included a model with two holes for mounting with screws if that is what you prefer.