LM2596S Buck Converter Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just needed a simple housing for a buck converter. Buck Converter(s) Used:…
- Ocena
- 4,333 / 5
- Polubienia
- 24
- Pobrania
- 165
- Wydruki
- 4
- Wyświetlenia
- 1198
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
9 Apr 24 - Added improved housing that features additional vent holes on the side, as well as minor improvements such as small chamfers on all edges for a more refined model.
Just needed a simple housing for a buck converter. Text on side reads “Ya ikou!” or “Hey let's go!” → My business (www.yaikou.com)
Buck Converter(s) Used: https://www.amazon.com/gp/product/B07QKHR6PY
Assembly:
- Solder wires to the top of the pads before placing in the housing
- PCBA should just 'clip' in at the bottom
- Lid clips in. You can adjust the voltage through the vent in the lid
- Two 3mm holes in bottom to mount the housing
Before energizing the module, make sure the screws will not interface the bottom of the PCB. I left 4mm between the perimeter "standoff" and the bottom of the PCB, but check for any through-hole components that may interfere.
Print Settings
Rafts:
No
Supports:
No
Filament: Any ABS, ASA, PETG, PLA Any
Category: Electronics