LM2596S Buck Converter Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just needed a simple housing for a buck converter. Buck Converter(s) Used:…
- Rating
- 4.333 / 5
- Likes
- 24
- Downloads
- 165
- Makes
- 4
- Views
- 1,199
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
9 Apr 24 - Added improved housing that features additional vent holes on the side, as well as minor improvements such as small chamfers on all edges for a more refined model.
Just needed a simple housing for a buck converter. Text on side reads “Ya ikou!” or “Hey let's go!” → My business (www.yaikou.com)
Buck Converter(s) Used: https://www.amazon.com/gp/product/B07QKHR6PY
Assembly:
- Solder wires to the top of the pads before placing in the housing
- PCBA should just 'clip' in at the bottom
- Lid clips in. You can adjust the voltage through the vent in the lid
- Two 3mm holes in bottom to mount the housing
Before energizing the module, make sure the screws will not interface the bottom of the PCB. I left 4mm between the perimeter "standoff" and the bottom of the PCB, but check for any through-hole components that may interfere.
Print Settings
Rafts:
No
Supports:
No
Filament: Any ABS, ASA, PETG, PLA Any
Category: Electronics