TomTom Rider bracket mounting adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact solution for fastening a TomTom Rider active base to a common 22mm diameter tube bracket.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact solution for fastening a TomTom Rider active base to a common 22mm diameter bracket on my wife's Honda Transalp XL 750.
Note: Due to size limitations the base is rotated by 90°. It hasn't been any problem, because the mount itself can be rotated by 90° again.
What you need
Please note: All links to Amazon (amzn.to), AliExpress (s.click.aliexpress.com) or marked with * are affiliate links, through which I receive a small commission. Perhaps you would like to support my work by making a purchase.
Parts used (BOM)
1x TomTom active base mount (printed)
1x TomTom active base (suitable for 4xx and 5xx series)
https://www.louis.de/artikel/tomtom-aktivhalter-fuer-rider-42-50-400-410-450-und-550/100073441x 22m diameter bracket
https://s.click.aliexpress.com/e/_c4tNLRip4x suitable screws (haven't got the dimensions on hand)
Some thread lock
https://amzn.to/4oSk2ecSome heat shrink or old bicycle inner tube
Tools used
Screwdriver or allen-key suitable for your screws
Suggested print settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 40% or higher
Perimeters: 4 or more
Instructions
Print mounting adapter
Install bracket on motorcycle
Wrap some heatshrink or bicycle inner tube around the 22m tube
Slide mounting adapter over heat shrink / bicycle tube
Mount active base with 4 screws and tighten
If base has too much play on 22mm tube, add more heat shrink / bicycle tube
Install cable of TomTom active base
Happy riding 😉