Core One/+ Bed Test Bed Cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a bed test for my MK4S, but when I upgraded to the Core One, I needed a new one.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 461
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a bed test for my MK4S, but when I upgraded to the Core One, I needed a new one.
This model is pretty much the same as my MK4S bed test, but it is bigger for the Core One's larger print area. It can be used to make sure your bed is leveling correctly, or to remove any small pieces of plastic of the bed.
It also works great for removing the white print from MK4/S textured sheets! I found that if you printed on top of it it pulls it off, so that it won't get stuck to the prints you don't want it on.
Print Settings
Set your first layer speed to 250 mm/s so that it goes faster.
Layer Height: | 0.2 | Support: | NO |
Infill : | N/A | Brim | NO |
Material: | PETG | Filament Designation : | N/A |
More Designs:
 |  |  |