1 / 8
Pi CAM mount V2 for Ender3 V3 SE with FreeCAD file for different CAMs! — zdjęcie 1
1 / 8

Pi CAM mount V2 for Ender3 V3 SE with FreeCAD file for different CAMs!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Pi CAM mount V2 for Ender3 V3 SE that has the Funssor Z Axis gantry support Kit.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is another Pi CAM mount, V2, for an Ender3 V3 SE that has the Funssor Z Axis gantry support Kit. Use a panhead m3x10 screw.  A nut is not required as the hole is undersized. This is for the PiCAM V1.3.

I've included the FreeCAD files for anyone who is trying to learn this awesome program. If your CAM is different you can still use this mount by just editing the CAM Pocket component to adjust for a different CAM size. One thing I should mention is that the tolerances for the CAM to slide in are set up for printing on the V3 SE printing at a moderate speed as shown in the images. If printed on a Voron or other high speed printer the cam will need some shimming. I just used a narrow strip of painter's tape. 

The V1 version is still uploaded at https://www.printables.com/model/1504320-pi-cam-mount-for-ender3-v3-se-with-freecad-file-fo for comparison or actual use.   

You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049  &  https://www.printables.com/@JimChristian_3198049/models  They work well  :-)

Also, if you find value in this, please give it a like. Thanks.

Tagi