1/4 Scale Federal Signal Equinox (HUGE REVAMP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Federal Signals 8 Port Version of Their 2001 Series
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
HUGE CREDIT TO MILES PETERSON FOR THIS MODEL
Hardware and Electronics
This model uses a 31ZY PMDC motor with a 3-3.6mm shaft but the default shaft size is 3mm. the rotor rotates CCW. Miles recommends to print the rotor and stator with supports, print the rotor in PLA/PLA+ or any filament you prefer but PLA is recommended. use brim on the horn and print SLOWLY. Due to the weight of the siren, the base alone can't support it. Consider mounting it to a large base of wood or something else.
Go to the Tinkercad link and open it in tinker mode for more instructions
Note: I WILL PROBABLY RELEASE A FULL TUTORIAL VIDEO ONCE I HAVE PRINTED ALL THE PARTS
MOTOR: https://www.amazon.com/dp/B07KJ5RJVQ?th=1
Image Instructions
ROTATOR:



ROTOR:


The motor should fit snugly in the stator hole. Make sure the motor is REALLY snug or else it might cause imbalance and scraping! Secure the motor with M3 screws
