115 modeli
READ BEFORE ATTEMPTING TO MAKE!!! I am no Edaan, Nascarsimracing1, or Connor Cruz and my designs are not the most professional!! This means certain parts of the model are not designed perfectly. This mainly includes the connection between…
This is the model of siren used to warn our neighborhood. My son loves it, and we hang out at the park several times a week so he can look at it. As with all of my simplified geometry tornado sirens, the goal isn't for accuracy, but for…
Using same rotor, stator, and motor mount. New housing and legs.
These lids are directly interchangeable with the original design and are for the federal automatch and value packs.
This is a 1/3 Scale 3T22A (or 2T22A) with WORKING DAMPERS!!! This siren was a collaboration between Nascarsimracing1 and I This siren weighs approximately 9 pounds! Thank you Jared for modeling this, my old modified Edaan B-core may be…
READ BEFORE ATTEMPTING TO MAKE!!! I am no Edaan, Nascarsimracing1, or Connor Cruz and my designs are not the most professional!! This means certain parts of the model are not designed perfectly. This mainly includes the connection between…
Using same rotor, stator, and motor mount. New housing and legs.
The motor body and endbell are secured using the original screws that come with the motor. Motor is a Samsung DE31-00029H. You can also use a DE31-00029K or DE31-00029J or any other 29 motor. There are two motor body variants. The "normal…
A concept that began with a question: What if Federal made a larger version of the 2T-22 based on the STH-10? Thus, the 2T-22XL was born. This design uses Nascarsimracing1's 1:3 scale STH-10 as a base, with an additional 10-port rotor…
DISCLAIMER The information provided here is offered on an AS-IS basis only. While I have efforted to make this helpful to you, I do not offer any warranty or guarantee of any kind regarding any aspect of this information. The information…
FROM MY END, SUPPORT FOR THIS HAS ENDED. THIS IS VERY BAD IN MANY WAYS, AND I HAVE CANCELLED SUPPORT AND MOVED ONTO REMODELING ENTIRELY. YOU CAN ATTEMPT THIS, BUT YOU WILL DEFINATELY HAVE TO MODIFY MANY THINGS YOURSELF. I am only keeping…
HARDWARE: unknown amount - M3 by 10 screws 3x - M4 by 10 screws 1x - M4 eyebolt 1x - 8 to 8mm shaft coupler (14 by 25mm) (link below) 8x - 3/16 x 1-1/4 fender washers (Hillman H# 885521) (link below) 1x - OH SUNG microwave blower motor (a…
These lids are directly interchangeable with the original design and are for the federal automatch and value packs.
Since I made my 22LR Bullet Holder I have made a bunch of lids with different logos on them, and I was asked to make one for Federal Auto-Match ammo, so I made three. For the "Auto-Match" and "Federal Auto-Match" lids, color changes are:…
Thunderbolt 1003: Blower and Chopper Motor: Amazon.com : Wenheww DC 12V 4000RPM Gear Motor Metal D-shaned Shaft Reduction Gearbox GA12-N20 Electric Motor Gear Box, Landing Gear, Mechanical Arms, Electronic Toys 2pcs : Toys & Games Rotator…
This is a ⅓ scale, fully functional Federal Signal Model 5. NOTE: THIS MODEL IS STRICTLY FOR 3D PRINTING. DO NOT PUT THIS MODEL IN ANY VIDEO GAMES LIKE ROBLOX! The siren is held together with M3 and M4 screws. The eyebolts are just…
This is a ⅓ scale working model of a Federal Signal STH-10. This siren uses a Samsung DE31-00029H microwave blower motor. It is also compatible with the 29K and 29J and any other 2.9/2.95" length Samsung motor. Credit to my boi Charlie…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
README: All stls are already in the correct print orientation. Motor: Any 29 series Samsung microwave blower- DE31-00029H, DE31-00029K, DE31-00029J, etc etc You can find these for decent prices on ebay. If you want to have the more common…
Son flores Navidad, Pascua, Estrella Federal para armar, se imprimen los pétalos, el centro y el tallo. Se adjuntan 3 configuraciones de pétalos. Se adjunta tallo más largo. En el caso de necesitar escalar el modelo, escalar todas las…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
Este troféu foi desenvolvido para ser entregue Show de Talentos 2024, do Instituto Federal de São Paulo campus Birigui, para o vencedor destaque na categoria Literatura. ------------ This trophy was designed to be awarded at the 2024…
Este troféu foi desenvolvido para ser entregue Show de Talentos 2024, do Instituto Federal de São Paulo campus Birigui, para o vencedor destaque na categoria Música. -------------------- This trophy was designed to be awarded at the 2024…
Este troféu foi desenvolvido para ser entregue Show de Talentos 2024, do Instituto Federal de São Paulo campus Birigui, para o vencedor destaque na categoria Dança. ------------------- This trophy was designed to be awarded at the 2024…
Este troféu foi desenvolvido para ser entregue Show de Talentos 2024, do Instituto Federal de São Paulo campus Birigui, para o vencedor destaque na categoria Artes. -------- This trophy was designed to be awarded at the 2024 Talent Show…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
You can put the Federal tray in the box without having to handle single rounds. Box can be partially opened to prvent dumping all the ammo at once. I also have a version for CCI Ammo.
The store was sold out of these, so I did my best to do something better than putting electrical tape over the hole. It was my first real attempt at CAD, please feel free to improve upon the design and link back to my work as a remix.
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This is a specialized AF timer build I made for @nascarsimraci_903773 's excellent ⅓ scale 3T22A model . It's not built for an original Federal Signal A11 board or switches, but is built to resemble it. Instead, I utilized a…
Federal Signal STH-10 Siren Horn Spacer This spacer is designed for Federal Signal STH-10 sirens. It fits between the horns and is to be bolted down, so it needs to be strong and durable. This spacer fits a 5/16" bolt. Recommended Print…
This is a 1/3 Scale 3T22A (or 2T22A) with WORKING DAMPERS!!! This siren was a collaboration between Nascarsimracing1 and I This siren weighs approximately 9 pounds! Thank you Jared for modeling this, my old modified Edaan B-core may be…
Can be printed with any material. Print uses Screws. This siren should be compatible with the rotator box for my Tbolt model, but I plan to make it's own rotator box in the future. This siren should be held on the rotator box by friction.
A map of Germany an its federal states plus capitals. It's desinged to be printed on a Prusa XL bed size. At least bavaria, wich is the biggest part. You may scale it, the gaps between the parts are relativly big (0,3mm) but I havn't…
This is a functional 2t22 siren model with Dual Tone! It works with two DC 130 motors. Please excuse me for having two motors and covering them with a motor cover. This is not the case with the original 2t22, but I wanted to design the…
This is a Federal Signal SD-10 siren model. You will need a DC-130 3v motor. This model does not require complicated or extensive hardware. For this model, you will essentially only need the motor, superglue, and a small amount of cable,…
~ 1/2.5 scale Made COMPLETELY on Tinkercad (including chopper): https://www.tinkercad.com/things/gYS41OerltJ-fs-model-5 PRINT ALL PARTS SEPARATE DO NOT PRINT THE FULL MODEL, IT IS THE FULL MODEL LIKE THE PICTURES AND CANNOT BE SEPARATED…
~ 1/2.5 scale Made COMPLETELY on Tinkercad (including chopper): https://www.tinkercad.com/things/bXrYOfCuO9e-fs-model-2 PRINT ALL PARTS SEPARATE DO NOT PRINT THE FULL MODEL, IT IS THE FULL MODEL LIKE THE PICTURES AND CANNOT BE SEPARATED…
~ 1/2.5 scale Made COMPLETELY on Tinkercad (including chopper): https://www.tinkercad.com/things/iZcwVdaYTu9-fs-model-7-12-port PRINT ALL PARTS SEPARATE The stator and rotor should fit inside the housing including compatibility with an…
This is a small Federal Signal Model A Siren! As far as I know, this is also the first model on printables! I actually wanted to make a 1:1 replica, but ended up making a smaller version. Like all my other siren models, it works with a DC…
~ 1/2 scale Made COMPLETELY on Tinkercad (including chopper): https://www.tinkercad.com/things/2ZpESAWSAzF-fs-canadian-model-2-3z PRINT ALL PARTS SEPARATE The stator and rotor should fit inside the housing with compatibility with an…
This model is the first 2001 SRNB model on Printables! It's a bit bigger than what I usually do, but a user requested this model, so here it is! The stator, chopper, and part of the horn shouldn't be too difficult to assemble, as they are…
It's a mini FS model 1 made fully on TinkerCad https://www.tinkercad.com/things/adAdOQDA6zC-fs-model-1 ; it uses a DC 130 motor. (I will upload more pictures when I print it) HOW TO BUILD: First, take the chopper and use a drillbit the…
fedelcode type 1 model i made, going off reference photos of Newport, DE , Columbus, GA , Youngstown, NY fedelcode type 1 sirens. going off The siren wiki, the rotors are 9" wide, and using this info, imagemeter gave measurements for…
Huge thanks to my friend Demetrius for giving me his ⅓ scale federal gearbox model! All credit goes to him for that. Right now this only has the 10/12 variant, but I will later be adding single tone 12, 8, and dual tone 9/12 variants as…
This is a ⅓ scale, fully functional Federal Signal Model 7. The siren is in a beta phase and not fully complete yet. Motor covers are from my friend Demetrius P. so credits to him! NOTE: THIS MODEL IS STRICTLY FOR 3D PRINTING. DO NOT PUT…
DISCLAIMER The information provided here is offered on an AS-IS basis only. While I have efforted to make this helpful to you, I do not offer any warranty or guarantee of any kind regarding any aspect of this information, The information…
This is a 1/2 scale fully functional replica. I measured off of my real model 2 and real 3T22 hat to make this model. I do not own a housing for my real Model 2, but Model 2's literally use a 3T22 hat for the housing top. So my 3T22's hat…
here's a revamp of my previous 1:1 model A that was made in tinkercad. this one is very accurate as well as proportional! made in OnShape. Huge thanks to Marryfluffy2020 for help in testing parts! self to note: don't expect the parts to…
HUGE CREDIT TO MILES PETERSON FOR THIS MODEL Hardware and Electronics This model uses a 31ZY PMDC motor with a 3-3.6mm shaft but the default shaft size is 3mm. the rotor rotates CCW. Miles recommends to print the rotor and stator with…
DISCLAIMER The information provided here is offered on an AS-IS basis only. While I have efforted to make this helpful to you, I do not offer any warranty or guarantee of any kind regarding any aspect of this information. The information…
This model is NOT my original creation ; it is simply a reupload intended to make downloading easier and more convenient for users on Printables. and all rights, ownership, and credit belong entirely to @milespeterson5049 , the original…
The motor body and endbell are secured using the original screws that come with the motor. Motor is a Samsung DE31-00029H. You can also use a DE31-00029K or DE31-00029J or any other 29 motor. There are two motor body variants. The "normal…
A concept that began with a question: What if Federal made a larger version of the 2T-22 based on the STH-10? Thus, the 2T-22XL was born. This design uses Nascarsimracing1's 1:3 scale STH-10 as a base, with an additional 10-port rotor…
DISCLAIMER The information provided here is offered on an AS-IS basis only. While I have efforted to make this helpful to you, I do not offer any warranty or guarantee of any kind regarding any aspect of this information. The information…
FROM MY END, SUPPORT FOR THIS HAS ENDED. THIS IS VERY BAD IN MANY WAYS, AND I HAVE CANCELLED SUPPORT AND MOVED ONTO REMODELING ENTIRELY. YOU CAN ATTEMPT THIS, BUT YOU WILL DEFINATELY HAVE TO MODIFY MANY THINGS YOURSELF. I am only keeping…
Update April 15th - You have a choice now if you want to use a roots blower or a centrifugal blower. The roots will be more powerful and efficient, but harder to put together than the centrifugal. DISCLAIMER The information provided here…
HARDWARE: unknown amount - M3 by 10 screws 3x - M4 by 10 screws 1x - M4 eyebolt 1x - 8 to 8mm shaft coupler (14 by 25mm) (link below) 8x - 3/16 x 1-1/4 fender washers (Hillman H# 885521) (link below) 1x - OH SUNG microwave blower motor (a…
Since I made my 22LR Bullet Holder I have made a bunch of lids with different logos on them, and I was asked to make one for Federal Auto-Match ammo, so I made three. For the "Auto-Match" and "Federal Auto-Match" lids, color changes are:…
Thunderbolt 1003: Blower and Chopper Motor: Amazon.com : Wenheww DC 12V 4000RPM Gear Motor Metal D-shaned Shaft Reduction Gearbox GA12-N20 Electric Motor Gear Box, Landing Gear, Mechanical Arms, Electronic Toys 2pcs : Toys & Games Rotator…
This is a ⅓ scale, fully functional Federal Signal Model 5. NOTE: THIS MODEL IS STRICTLY FOR 3D PRINTING. DO NOT PUT THIS MODEL IN ANY VIDEO GAMES LIKE ROBLOX! The siren is held together with M3 and M4 screws. The eyebolts are just…
This is a ⅓ scale, fully functional Federal Signal Model 5. NOTE: THIS MODEL IS STRICTLY FOR 3D PRINTING. DO NOT PUT THIS MODEL IN ANY VIDEO GAMES LIKE ROBLOX! The siren is held together with M3 and M4 screws. The eyebolts are just…
PHOTOS ARE FROM ThatSirenEnthusiast and sirensofcentralohio. Thanks to them and making this project working! MORE MOUNTS, MOTOR COVERS, AND HORNS WILL BE ADDED SOON! WHAT YOU NEED! Wheel Weights:…
Reverse engineered off a Federal Ordnance clip guide. Thumb screw is a 1/4-20.
a small controller for sirens (Was made mainly for JNPrinting's Federal Signal 2001 SRNB (Fully Functional) or any siren
Federal Corvette model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
Federal Assault Ship model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
Federal Gunship model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, needs supports This work is strictly fanart and not meant for commercial…
Federal Dropship model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
A 2-piece model of a Federal Signal Streethawk lightbar dome
DEUTSCH (English description below) Die Deutschlandkarte setzt sich zusammen aus 16 Teilen, je eines für jedes Bundesland. Die einzelnen Teile passen perfekt ineinander. So könnt ihr die Karte als Puzzle, zu Lernzwecken oder einfach als…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
This is a ⅓ scale working model of a Federal Signal STH-10. This siren uses a Samsung DE31-00029H microwave blower motor. It is also compatible with the 29K and 29J and any other 2.9/2.95" length Samsung motor. Credit to my boi Charlie…
This is a Federal Signal type rotor that is 9/12 port. This uses s 280 DC motor that can be found easily on Amazon. It could be 6-9v. If you are going to use this model for your own model, make sure the license matches and that you give…
Worm gear wheel with 80 teeth and a 5 degree angle. Used to fix an old Federal Standard Beacon rotating light. Used .2mm layer height. In the photos new gear is on the right or on top of the old gear.
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
![[NEW MODEL IN PROGRESS] Mini Federal Signal Thunderbolt (Functional) [NEW MODEL IN PROGRESS]](https://media.printables.com/media/prints/ec0ac4b5-cb04-4fee-9875-f961f9ef126a/images/12745673_affa9b69-e625-4314-b564-a7ad6a6e6af9_857d78fc-04a8-4837-94bd-40ae7cfbabba/screenshot-2026-04-22-230545.png)
