Raised Jugger Buckler Handle for 14mm and 12mm Carbon tubes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buckler Handle for Jugger shield. 2 per shield, fitted with 14mm and 12mm Carbon tubes and epoxied to the EPP plate.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
I print with extrudr flex hard/semisoft, 0.4mm nozzle, 0.3mm layerheight, standard flex filament settings, 15% cubic infill, 2 perimeters.
For the complete handle you need 120mm (for size L hands) 14/12 and 12/10 carbon fibre tubes.
Model is made for Right-handed juggers, mirror if neccessary.
I recommend cutting a shallow triangular depression about 6cm wide and 1cm deep into the EPP below the handle, it makes room for the fingers.
I epoxied it to my shield, and it has held for more than a year now.