1 / 1
Raised Jugger Buckler Handle for 14mm and 12mm Carbon tubes — image 1

Raised Jugger Buckler Handle for 14mm and 12mm Carbon tubes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Buckler Handle for Jugger shield. 2 per shield, fitted with 14mm and 12mm Carbon tubes and epoxied to the EPP plate.

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
48
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

I print with extrudr flex hard/semisoft, 0.4mm nozzle, 0.3mm layerheight, standard flex filament settings, 15% cubic infill, 2 perimeters.

For the complete handle you need 120mm (for size L hands) 14/12 and 12/10 carbon fibre tubes.

Model is made for Right-handed juggers, mirror if neccessary.

I recommend cutting a shallow triangular depression about 6cm wide and 1cm deep into the EPP below the handle, it makes room for the fingers.

I epoxied it to my shield, and it has held for more than a year now.

Tags