1 / 10
Montagerahmen für Fritzbox 7690 und Casa FTTdp Modem NDD-0305-01 — zdjęcie 1
1 / 10

Montagerahmen für Fritzbox 7690 und Casa FTTdp Modem NDD-0305-01

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Montagerahmen um dir Fritzbox 7690 und das FTTdp modem von Casa platzsparend zu montieren

Ocena
0 / 5
Polubienia
2
Pobrania
43
Wydruki
0
Wyświetlenia
399
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Unser Haus wurde mit FTTdp (firbre to the distrebution point) ausgestattet. Mein Provider stellte mir ein FTTdp Modem das nun zwichen den Router und dem Anschluß geschaltet werden mußte.

Da der Platz an der Wand langsam knapp wurde habe ich einen Montagerahmen konstruiert, bei dem das Modem hinter die Fritzbox 7690 platziert wird und so keinen zusatzlich Platz benötigt. Die vorhande Befestigung der Fritzbox kann für den Rahmen weiter benutzt werden. FREECAD Dateien zur Anpassung an andere Modems. 

17.12.2025  - Variante  für kleineres Druckbett hinzugefügt ( Core 1, MKX) .

Our house has been equipped with FTTdp (firbre to the distrebution point). My provider provided me with an FTTdp modem that now had to be switched between the router and the connection. Since the space on the wall was slowly running out, I designed a mounting frame in which the modem is placed behind the Fritzbox 7690 and thus does not require any additional space. The existing attachment of the Fritzbox can be used for the frame can continue to be used.

17.12.2025  - Variante for smaler printarea added (Core 1, MKX).

Tagi