Reloading powder dropper humidity control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silica dryer for reloading powder dropper
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I don't even know if this is strictly necessary but since my powder sits in the dropper all time and I don’t pour it back into the container, I figured why not.
This design consists of a silica gel basket which holds around 23g of silica (I chose the regeneratable one which can be dried in the oven or microwave) and a top cap.
One cap for the Dillon dropper (fits into place without an O-ring like the original) and one for the xray-parts ultimate dropper (for which I transferred the original O-ring onto the new cap [rather tight fit with the O-ring]).
The silica basket is interchangeable.
Prints in place without any support.
The holes of the basket are 1mm in diameter, most silica pearls are 2-5mm so no spillage should occur.