Reloading powder dropper humidity control
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silica dryer for reloading powder dropper
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
I don't even know if this is strictly necessary but since my powder sits in the dropper all time and I don’t pour it back into the container, I figured why not.
This design consists of a silica gel basket which holds around 23g of silica (I chose the regeneratable one which can be dried in the oven or microwave) and a top cap.
One cap for the Dillon dropper (fits into place without an O-ring like the original) and one for the xray-parts ultimate dropper (for which I transferred the original O-ring onto the new cap [rather tight fit with the O-ring]).
The silica basket is interchangeable.
Prints in place without any support.
The holes of the basket are 1mm in diameter, most silica pearls are 2-5mm so no spillage should occur.