Ratcheting Capstan Winch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of a 2 speed ratcheting winch.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As a CAD modelling exercise, I wanted to see if I could make a 2 speed ratcheting winch. In this design, one direction ratchets the winch directly, while the other uses gearing to ratchet with a mechanical advantage.
The tolerances are a little finicky, so the CAD file is available on onshape.
In a real capstan winch, there is an internal structure all the way up, allowing a static cap that has a rope feeder, but this was too complicated in this version.
For the handle, I just used an old ikea hex wrench I had lying around. The model is parametric though, so you could adjust this.