CheeseMix Cage for sony a6700
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CheeseMix Cage for sony a6700 provides mounting points for rigging and accessories.
- Ocena
- 0 / 5
- Polubienia
- 12
- Wydruki
- 0
- Wyświetlenia
- 988
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Standard Digital File License
The CheeseMix Cage for sony a6700 is compatible with all CheeseMix plates and accessories.
Featuring Arca Swiss quick release plate Integrated into the bottom. Twelve 1/4-20 mounting points (4 on the bottom, 3 on top, 3 left and 2 right) with 3mm anti twist pin holes. Extended grip. Wrist strap mounting points above and bellow the grip. Access to all buttons and dials. Dummy battery power cord passthrough (the battery door is blocked by the cage and cannot open). The cage attaches to the camera body at three points.
The cage is designed around a 9mm grid. The width and height of the cage fall on this grid (w135mm x h90mm), mounting holes are 18mm apart. Printed in two parts the cage is assembled around the camera using one 1/4-20 x 1/2" cap screw, eight m2.5 x 16mm screws and eight m2.5 nuts.
I got hardware here:
Socket head bolt, 1/4-20 x 1/2" https://monsterbolts.com/products/socket-low-hd-blk-alloy-1-4-20?variant=39088659788
Hex nut 1/4-20, 7/16 drive, 0.1875 (3/16) or thinner.
Pan head bolt, m2.5 x 16mm https://monsterbolts.com/products/mach-phil-pan-a2-m2-5?variant=38432675724
Hex nut, m2.5 https://monsterbolts.com/products/nuts-din934-a2?variant=29412157358163
Printing | |
|---|---|
Layer Height | 0.2mm |
Walls | 3 or more |
Top/Bottom | 3 or more |
Infill | 25% or more |
Support | Yes |
CheeseMix is designed for 1/4-20 hardware. The main fastener is a 0.5" (1/2) long cap screw with a head Diameter of 0.375 (3/8) and a head thickness of 0.125" (1/8). The bolt head sits bellow the surface of the plate, recessed in the hex pockets. Nuts should be 7/16 flat to flat and 0.1875" (3/16) thick, or less, to sit bellow the surface of the plate.