Computer Fan Spacer Ideal for Lian Li RGB PC Fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a 16.5mm offset for 140mm or 120mm fans, so the infinity fan mirror sides are not hidden behind the case bevels.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Open Community License v1
This is a computer fan spacer that adds a 16.5 offset and is 140mm wide and designed to hold fan screws 125mm apart (on a side not diagonally) for a 140mm fan. I also have a model here for 120mm fans. The pictures show the 140mm version.
I designed it against my Lian Li Uni Fan SL-INF 140 RGB Fans so I could then expose the lighted mirrors on the sides of the fans.
I made this as my Lian Li fans side mirrors were not visible before and I wanted to offset the fans down below the case edges which were about 16.5mm thick. In addition, for my Lian li case, Im also had a strange problem where the rear fan did not fit well as it was 4mm too wide to fit in the rear exhaust port fan slot, so offsetting beyond the case bevel fixed that problem as well. The stock fan that the case came with fit, but this nicer Lian Li fan did not.
I designed this spacer to be used with 45mm or 50mm m3 or m4 screws that pass all the way through, with a nyloc lock nut or m3/m4 hex nut on the end. Only two screws are needed if you place them diagonally. The screw holes are 5.0mm in diameter.
In the slicer you could easily change the Z on this to increase or decrease the offset amount to match your case bevel thickness, in which case you would then use a different length screw to secure.
The photos show how the sides of the infinity mirror on the fans are no longer hidden behind the rear and top computer case bevels.
The irony is that these are Lian Li fans and a Lian Li case and there is no way this would have looked nice without theses spacers. I guess Lian Li has two internal teams that don't talk to each other and test how their designs would work together, which is a problem in most large companies.