Holder for Fitness Utensils
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holders in the design, Balance Board, Hula Hoop ring, Pushup Bars
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 39
- Wydruki
- 6
- Wyświetlenia
- 811
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
During the last year i started to build myself a little homegym. My fiance soon wanted to join in and brought in alot of fitness utensils. As i wanted as less furniture as possible in my small room, i designed this holders to screw them on a flat woodboard to keep the place clean and tidy.
Balance Board
Fits a Balanceboard in Ø395mm and 15mm thickness.
Printsettings:
Printed with PLA as there should be no force unless gravity aplied.
Printed in the mounted orientation with supports.
3 Walls
15% Infill
Added modifiers to Increase Infill arround Screwholes.
Details:
Screwholes: 4 times 5mm Woodscrews with countersunk head. (Holes are 6mm)
HulaHoop
Printed for a Hulahoop in the size of Ø1000mm. Would also hold smaller or bigger hoops.
Added are 2 designs.
I printed 2 Holders, mirrored them and added 3 of Ø3.6mm x 20mm splints.
File HulaHoopHolder Double
But 1 holder would probably be enough therefore i also added a 1 piece version.
File HulahoopHolder Single
Printsettings:
Printed with PLA as there should be no force unless gravity aplied.
Printed flat on the screwed on surface.
3 Walls
15% Infill
Added modifiers to Increase Infill arround Screwholes and splints.
Details:
Screwholes: 2 times 4mm Woodscrews (Per piece) with countersunk head. (Holes are 4.2mm)
Splints: 3 times Ø3 x 20mm
Pushupbars
Printed for Pushupbars Ø25.5mm bar radius 60mm. Embeded some magnets, therefore make sure the bars are magnetic! Won't work without magnetic bars!
Printsettings:
Printed with PLA as there should be no force unless gravity aplied.
Printed flat on the screwed on surface.
3 Walls
15% Infill
Added modifiers to Increase Infill arround Screwholes. (100 Infill till 8mm height)
Details:
Screwholes: 4 times 4mm Woodscrews with countersunk head. (Holes are 4.2mm)
Magnets: I embeded 2 Magnets Ø8 x 3mm (Stop @ ca. 14mm and 38mm height.)
Further Infos
Also see my resistanceband Holder i designed some time ago.
https://www.prusaprinters.org/prints/109912-wall-holder-resistance-bands
If you would like some adjustments made on the prints just let me know and we will see what i can do! :)
Happy printing!