Holder for Fitness Utensils
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holders in the design, Balance Board, Hula Hoop ring, Pushup Bars
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 39
- Makes
- 6
- Views
- 811
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
During the last year i started to build myself a little homegym. My fiance soon wanted to join in and brought in alot of fitness utensils. As i wanted as less furniture as possible in my small room, i designed this holders to screw them on a flat woodboard to keep the place clean and tidy.
Balance Board
Fits a Balanceboard in Ø395mm and 15mm thickness.
Printsettings:
Printed with PLA as there should be no force unless gravity aplied.
Printed in the mounted orientation with supports.
3 Walls
15% Infill
Added modifiers to Increase Infill arround Screwholes.
Details:
Screwholes: 4 times 5mm Woodscrews with countersunk head. (Holes are 6mm)
HulaHoop
Printed for a Hulahoop in the size of Ø1000mm. Would also hold smaller or bigger hoops.
Added are 2 designs.
I printed 2 Holders, mirrored them and added 3 of Ø3.6mm x 20mm splints.
File HulaHoopHolder Double
But 1 holder would probably be enough therefore i also added a 1 piece version.
File HulahoopHolder Single
Printsettings:
Printed with PLA as there should be no force unless gravity aplied.
Printed flat on the screwed on surface.
3 Walls
15% Infill
Added modifiers to Increase Infill arround Screwholes and splints.
Details:
Screwholes: 2 times 4mm Woodscrews (Per piece) with countersunk head. (Holes are 4.2mm)
Splints: 3 times Ø3 x 20mm
Pushupbars
Printed for Pushupbars Ø25.5mm bar radius 60mm. Embeded some magnets, therefore make sure the bars are magnetic! Won't work without magnetic bars!
Printsettings:
Printed with PLA as there should be no force unless gravity aplied.
Printed flat on the screwed on surface.
3 Walls
15% Infill
Added modifiers to Increase Infill arround Screwholes. (100 Infill till 8mm height)
Details:
Screwholes: 4 times 4mm Woodscrews with countersunk head. (Holes are 4.2mm)
Magnets: I embeded 2 Magnets Ø8 x 3mm (Stop @ ca. 14mm and 38mm height.)
Further Infos
Also see my resistanceband Holder i designed some time ago.
https://www.prusaprinters.org/prints/109912-wall-holder-resistance-bands
If you would like some adjustments made on the prints just let me know and we will see what i can do! :)
Happy printing!