Ikea SMÅSTAD / PLATSA handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed slide-on handles for IKEA SMÅSTAD/PLATSA doors, no drilling needed; fit ~1.4–1.5cm, print flat easy install
- Ocena
- 3 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 115
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
In preparation for our new born, we bought a SMÅSTAD / PLATSA unit from Ikea with a couple of handles that needed to screwed in the wardrobe. Unfortunately I did not have a drill at hand, so decided to print these slide-on handles. They should be compatible with any other door with a width of around 1.4-1.5cm.
No specific printing instructions, just lay the biggest side flat on the bed.
You can add some double sided tape to the inside just to prevent it sliding up and down if it fits slightly lose. On my doors, one fits perfectly, the other is firm but a bit more lose so tended to move up and down - down to 3d printing inaccuracy.
UPDATED VERSION - adjusted the thickness and added a flange for sturdiness, adjusted the slide-on gap for a tighter fit.
Print Settings
Printer brand:
Artillery
Printer:
Artillery Genius
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
5