1 / 4
DOF Reality DaytonAudio BST-300EX Bass Shaker Pedal Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your bass shaker directly to the chassis.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (10)Powiązane
This fits directly on the pedal mount, but does require drilling 4 8mm holes.
I printed off the mount, offered it up, and marked the hole through the print for alignment.
You'll need M8 90mm cap heads for the design, as well as some m8 nuts.
