Liczymy pasujące modele…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
These are fully-stackable PCB stands and hole gauges. I made three step sizes, 1mm, 2mm, and 3mm. The peg diameters go from M2-M14 (M2, M2.5, M3, M4, M5, M6, M7, M8, M10, M12, M14), and have a 4x step base. These are great for putting…
This is a modular system with which many kinematic chains, aka robot arms, can be constructed. The modules can be seen in image 1. The chosen actuators are very cheap servo motors without gearbox, which brings advantages and disadvantages…
Modified version with snap-in friction fit. No screws or threading required. The fit is a little bit tight to make sure that the feet doesn´t come lose by accident. Update: The locking tabs were a bit too tight for modern motherboards…
Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.9mm OD: 6.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the show us. :)
3D printed robotic arm with a video tutorial on youtube. I’ve developed a 6 axis robotic arm that can lift up to 150g with an amazing precision of 0.2mm thanks to stepper motors. This arms is my first project to develop a solution for…
These clip standoffs fit snuggly in the honeycomb tray of my Nova 24/60 Thunder Laser. They lift the material .125" off the tray, the clips hold it securely in place while the support standoffs are for supporting the center span, if…
This is a model of a small standoff for use with M2 screws, originally designed to be placed between a Raspberry Pi and a HAT board (Hardware Attached on Top). HATs often connect to the Raspberry Pi via the main row of headers, but can…
Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.48mm OD: 5.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)
Basic "I don't want my protoboard shorting or gouging holes in my desk" feet/standoffs for M3-drilled 1.6 mm thick PCBs. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 15% Filament:…
Standoff clamp to securely hold material for laser cutter/engraver and prevent flashback. Designed for Epilog Pro Laser Bed. May work on other honeycomb. Tapered from 5mm to 7.5mm. Holds material to be engraved and/or cut in 3mm (1/8") or…
I've been wanting to create a fully actuated robot arm using print-in-place techniques for a while. Here is the first stage, a simple toy knocked up real quick like, sorry for the scad - it's a real hatchet job. In future I'd like to…
ErgonoMouse is a do-it-yourself 6DOF Controller (6 Degrees Of Freedom) based on Arduino. Or commonly known as "space mouse". It uses commonly available hardware (see “Required Hardware” 🡣) and it requires intermediate printing,…
Model is 305mm x 244mm x 1mm and is based off the official ATX, Flex ATX, Micro ATX and ATX standards. The solid version uses roughly 100g, the skeletonized version uses roughly 50g Standoffs have no threads, feel free to remix to include…
PCB standoffs. For best results use .05mm layer height for threads. this will give you 10 layers per thread and should result in good performance. Please let me know if you find them useful. 12 mm standoffs with M3x0.5 threads. 3-10-19 -…
One piece Best way to call Don Quichotte Doflamingo
I made this in order to fit 2 buck converters on top of each other to save space. PCB Standoffs for small electronics with different heights The Bottom Piece diameter is 10mm Pillar is 5mm Top pin is 2.7ish mm B(Bottom) - #(Height)…
Summary This two degree-of-freedom pointer device uses compliant mechanism technology to obtain its motion. It was developed by the BYU Compliant Mechanisms Research group (compliantmechanisms.byu.edu), under a grant from NASA. 3 versions…
A mount to attach a 15mm x35mm din rail to a 2020 beam. Category: 3D Printer Accessories
This is standoff to mount the BTS7690 Driver Board with 4mm screw holes, mounting up and upside down possible If you want to mount it upside down, put the connection pins in the spot where the support beam is missing.
Very simple and easy to assemble 3D space mouse. It can input full 6 degrees of freedom (rigid motion) simultaneously. Very easy to assemble. Tripod mount (thread hole) is on the bottom side of the triangle shaft. Two types of base…
A remix of IKEA Skadis designs so the pegboard and standoffs don't have to be printed separately.
Simple Motherboard standoff. Thanks for looking! Print Settings Rafts: No Resolution: 0.3 Category: Electronics
A functional study model of an intriguing wrist joint as seen in a brief Hackaday article about a dextrous robotic arm from Korea. https://hackaday.com/2019/10/20/humanoid-robot-has-joints-that-inspire/ I printed it in three colors for…
Just a simple ATX motherboard standoff. It raises motherboard about 2.3cm. Print it with the infill at 25%, and at the top section make it 100%. If you have any suggestions please write them in the comments
The tele snail from Donquixote Doflamingo from One Piece! Size: 13cm (1:1)
Collection of M4 female-female self-taping spacers I use for my own projects. ID:3.96mm OD: 8.10mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)
Painter's Pyramids (aka Painter's Tripods) securely elevate your project off the work surface with minimal contact, allowing painted, stained or glued projects to be completed in one session with less mess and great results. The tabs…
This is the robot arm I made for my college project, it is designed to pick up and place cubes using computer vision. the complete proyect code and inverse kinematics can be found at https://github.com/papalino456/RobotArm, it uses an ESP…
Threaded Standoff: M2.5 M3 M4 M5 M6 Length: 5 10 15 20
This standoff i fits laser engraver honeycombs that are 6.5mm diameter for holes. This standoff has a 1.25 degree draft outwards towards the top to make it get slightly tighter as you push it into the honeycomb surface. Holds your…
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
Requiere servomotores: MG995, SG90, TD-8120MG
I was having trouble with overheating APs so I created this remix to help with airflow around the AP. It is a mounting plate for unifi APs with standoffs so that the AP does not mount flush with ceiling or wall. The locking tab also has a…
This part will allow you to mount your M.2 SSD in a pinch when you don't have the appropriate standoffs. You can mount the printed part without using any kind of glue however it is recommended to use a very small amount of adhesive that…
I've always wanted to build my own robot, so I designed this 4-axis arm to learn about mechanical design and control systems. Unlike expensive industrial arms, this project is cost-effective and easy to build at home. Whether you are a…
Well. Weekend is one day away and you haven't time to order one of the shiny metal trunk door standoffs to help keep your van from becoming a sauna. So print one. For stability reasons (and support structure hate) the hook gets printed…
I modify pieces to fit Tower Pro Sg90 servos, the original pieces didn`t fir correctly. Also modify the body to fits the Shield Javier de Isabel made for plug the nodemcu and all the servos. Category: Robotics
Designed to be used as PCB standoff when building a quadcopter, but obviously, it can be used in any PCB or other application. Should accept a M3 screws without any problem. NOTE: I tested a 8mm version printed with eSun ePA (nylon)…
The cap for the ornaments was tough to put on level and glue. I created a 4mm internal standoff in the cap. Now it's always level and much easier to glue. It also creates a gap for a hook or ribbon. UPDATE: I discovered the gap was a wee…
So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! This standoff will keep a…
Replacement for this type of computer case feet. Printed to replace a missing one. Dimensions are about 2.9cm diameter and 1.5cm height. Print sideways such that the layers are along the clip tabs (see pictures), with supports enabled.…
This is a basic spacer for the Raspberry Pi Pico. I'm using it by gluing the spacer to another part, which leaves the Pico still easy to remove. It is meant to be used on the top face of the Pico, and it's the same thickness as the Micro…
Some of my outlet box drywall cutouts are a little big, and I needed something to stand them off the boxes so that they mount flush with the faceplate. I made this little parametric model for a tidy solution. Measurements are all matching…
Computer (PC) motherboard standoff. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: gembird PLA+ gray Category: Computer
I am adding some pegboards to my workshop area and I realized I needed some standoffs to give them consistent space off of my walls. What's more, the mounting screws I have were just a bit too small to work through the holes of the board…
micro ATX board standoff. made it so i can have my mother board a little bit off the table so it can sit flat on the table top. the motherboard model is asrock h61m-vs. the screws for it are original motherboar screws and they just screw…
A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing…
I found that there are many people that posts M3 standoffs , but I could not find M2 standoffs for small circuit boards that I use in my Arduino Projects. So I whipped up a set of standard M2 standoffs in Fusion 360 in lengths that I…
This is 2 DOF gimbal for DJI Air Unit very similar to famous “ Motionsic Bad Ass Gimbal ” You will need 2 Savox sh-0257mg servos and set of hardware. Video demonstration on the RC truck:
My version of a simple standoff for mounting skadis boards to the wall. I chose to offset it by 10mm, which should leave plenty of room for addons, but not stick so far out as others. Normal print settings, 0.2-0.3 depending on nozzle…
I designed these to secure my 10th scale race buggies in their box on the way to the track. Simply put some adhesive velcro underneath the printed feet and inside the box you want to use. Simple, easy to handle and the car doesnt go…
RobBob is a 2 degree of freedom robot head that is powered by bevel gears! Spin one knob and robBob's head turns. Turn the knobs together and robBob will tilt his head up and down. You can add some servo motors and an arduino board to…
4-DOF 3D Printable Robotic Arm – NEMA 17 & Sun Gear Drive This project is a fully designed 4-DOF robotic arm developed with a focus on 3D printing, mechanical design, modular construction, and accessible actuation. The arm is designed…
I redesigned original model from Woogies. Bracket to mount 60mm fan to the front of Fractal Ridge pc case to improve the airflow. Front mesh on the case is restricting the airflow of the fan, that's why I redesigned the bracket to be used…
A collection of m3 standoffs commonly used in FPV racing drones Category: Parts
So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! This standoff will keep a…
ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components. I made these standoffs while designing a 10 inch rack…
This is a wash bucket standoff to keep sand and other grit from getting stuck in your sponge and other tools. Just insert the standoff into the bottom of the bucket to keep the grit out of your tools. You'll need about 10" of build space…
Lily58 Case with 7mm standoffs Print instructions 4 layers top 4 layers bottom 20% gyroid infill support as you wish
Standoffs for Ikea Skadis pegboards. 20mm outer diameter, 4.5mm inner diameter and 25mm height.
Stack-On gun cabinets come with plastic mounts to support and separate rifles and shotguns being stored in the cabinet. The mounts are an appropriate height for an un-scoped gun but if a scope is mounted it hits the cabinet wall before…
This model can not be printed without support, so i build in support (highlighted yellow in the screenshot) wich have to be removed to be able to insert the new feet in to the keyboard. The support has a 0.15mm seperation gab, wich should…
The robotic arm is part of a project whose goal was to develop a fully automated surgical robotic arm that can simulate knee surgery through a graphical interface. The knee bone model may be made available in another project. Idea by…
Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10 M10x14mm M10x42mm Suitable for:…
Easy to print! Print with e.g. 7 walls to make it solid. No supports or brim. May use mouse ear if you want. Use manual seam painting and place it on the middle of the standoff, not on the prongs/nubs on the ends.
20mm tall, 5mm hex standoff. elrs rp1 rp3
Various sized standoffs for the Barrina T8 branded LED tube lights readily available. The different heights should allow you to bypass any conduits/obstructions in your shop. I recommend to print these in either PETG or ABS as PLA might…
A small combination mounting bracket and standoffs for an NVIDIA Jetson Nano developer kit. Mounting holes are 5mm, or fit a #10 imperial screw. Print at whatever settings you like, no need for supports.
Simple shapes that raises your flat, freshly painted surface off the table so the paint doesn't smudge when you turn it over. Print 3 or more, scale them up in your slicer if 40mm sides are too small. The shape with the indent is easier…
So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! This standoff will keep a…
Same as original except you don’t need the standoff and back screw. Only 5 M2 screw per side :D
NOTE 3MF is Required in this model as negative parts are used Pla or ASA or ABS, it is a little flimsy as PLA but it does work, one in photos is in pla This will work on EITHER the left panel screws or the rear panel Screws 2 M3 Nuts need…
Halter für das Kamera-Übergabe Feature in macOS Ventura. Mit diesem Halter kann ein von der Kamera-Übergabe Funktion unterstütztes iPhone an einen iMac oder iMac Pro befestigt werden. Bisher konnte ich nur Halterungen für die M1 Mac-Reihe…
A bracket to replace the fragile stand off posts that the light switch brackets screws onto on the backside of 88 to 94 c1500 dash plinths. I've repaired 2 dashes with this having it printed in Nylon with an MJF printer. The remnants of…
Hello everyone, I'm thrilled about finally being able to post this project as it's my first robot. This right here, is a Robot arm made for my college robotics assignment. Its specially designed for serving cake (That was the assignment,…
Easy and quick print.
A compact magnetic riser designed to hold thin materials flat on a laser cutter honeycomb bed. The block contains a 25×5mm magnet that securely attaches to the steel honeycomb surface, keeping the riser firmly in place during cutting or…
I made a custom Packout charge station using some gas struts on the lid. I made these as a quick easy way to give the correct clearance and let the lid open all of the way. Check out that build here-
dARM (dynamic Arm for Robotic Mischief) dARM is a 3d printed 6 DOF robotic arm. Initially, I wanted to build a 3d printed arm as a test of my new Bambu X1C . I found most existing projects used stepper motors. I wanted a better power…
Insulation plate and standoffs for Bigtreetech Piggyback36, for extruders like Orbiter, Sherpa ect. https://paypal.me/radicalreel Use heat inserts for the standoffs The 1mm gap between stepper and insulation plate is intentionally to get…
These are M3 T-nuts for IKEA Skadis using M3 brass standoffs/spacers. On Amazon, you can search for "brass m3 spacer standoff female" and you should find kits of these. The sets will come with female-female and female-male. The…
Modified to fit Bambu Lab printer's small bed. Probably not suitable for all ATX boards because of that.
Mounts for XT60/XT60H to a Hex Standoff. Design was specific to the ImpulseRC Apex EVO but should fit any 28mm hex standoff. Design is parametric, let me know any versions you need I can export additional models - see my design video to…
This part fits GE refrigerators with an interior water dispenser. I found that the water spigot tube was angled too close to the wall and was difficult to fill many cups and water bottles. This standoff slides on and holds the tube at a…
Hawk 6DOF Hall Effect Joystick – Precision Flight & Space Sim Controller Overview The Hawk 6DOF Hall Effect Joystick is a high-precision, fully customizable flight and space simulation controller designed for immersive and responsive…
This is a 45° mount for the simplisafe doorbell camera. It has two pass throughs for the wall mounted screws and two for the simplisafe doorbell camera back plate. There is also a pass through for your door bell wires.
This is the remix version from Thingverse by shrop_pat. https://www.thingiverse.com/thing:4335944 This version cut down the height of the standoff to 3.9mm. so you will be able to use the calibration-z function on stock firmware. This is…
3D printing 2 DOF Arm Robot using geared DC motor.
A collection of brackets to hold 13mm hose pipes, including stand offs to allow for hoselock type fittings. I've been working on an irrigation project for my garden over many years, and in 2019 found the need to make a couple of brackets…
A small combination mounting bracket and standoffs for a Raspberry Pi. Works with model 3 and 4. Mounting holes are 5mm, or fit a #10 imperial screw. Print at whatever settings you like, no need for supports.
Standoff clamp to securely hold material for laser cutter/engraver and prevent flashback. Tapered from 6.20mm to 7.5mm. Holds material to be engraved and/or cut in 3mm (1/8") or 6mm (1/4").
Spider Quadruped Robot | ESP32 Powered 8-DOF This is an agile, 4-legged spider robot (quadruped) built for smooth movement and wireless control. By upgrading the classic frame with an ESP32 , this build gains WiFi/Bluetooth capabilities,…
My take on the classic Empi deckled standoffs Designed to use your original deckled mounting brackets these accept 3 M6 nuts per bracket and bolt onto the original location of your car to space out the top of the deckled to improve…
Just a simple model made from scratch, Includes 2x 18mm Stand offs Includes 1.5mm ‘nubbins’ to prevent shorting. Requires - 6x Brass inserts (including standoffs) or 2 if using without. - 2x M3x6 Countersunk/FHCS Screws - 2x M3x6 BH/SHCS…
Painting standoff (or painter's pyramid/cone) insert for BORA Centipede system. Fits in to factory "P-Cap." Its function is pretty straight-forward. Just set the piece you are painting directly on to the Centipede frame and go to town.…
This model is meant to be as simple as possible to print and use and it's especially suited for using leftovers of your almost empty spools. every spacer comes with a 5mm and a 10mm version. There are spacers for M2, M2,5 and M3 screws.
Simple standoffs to orient things using the FIXIT system. Uses 2.7mm bamboo skewers (has a 3mm hole) to adjust height between the base clamp and a cup. The cup holds plasticine or bluetac to secure most things pretty neatly. Designed for…
The original model has incorrect standoff length and does not account for the PCB thickness. This causes the back panel to bend. I shortened the 4 standoffs for the PCB by 2mm, and this greatly improves the fit of the enclosure.
![ErgonoMouse [Free version] - 6DOF Controller Knob & Joystick with Wheel, Buttons & Keys](https://media.printables.com/media/prints/973725/images/7443301_6431622c-6203-4049-abb5-c021b4241c1f_e177f1da-39c9-4328-8e49-8818ce495155/promo-knob-free.png)
