1 / 4
VW Caddy / T5 / T6 van trunk door standoff for camping / Heckklappenaufsteller — zdjęcie 1
1 / 4

VW Caddy / T5 / T6 van trunk door standoff for camping / Heckklappenaufsteller

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A spacer / standoff for the trunk door to allow air circulation in a camping van.

Ocena
5 / 5
Polubienia
64
Pobrania
380
Wydruki
1
Wyświetlenia
3536
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Well. Weekend is one day away and you haven't time to order one of the shiny metal trunk door standoffs to help keep your van from becoming a sauna. So print one. 

For stability reasons (and support structure hate) the hook gets printed flat. Heat the narrow end with a heat gun or a hair dryer. Use an oven mitten to gently press the hook into the mould. Let it cool and test it. If it doesn't fit properly, heat it again and modify.

Initially meant as a test to make a metal one, it proved surprisingly strong and is still in use. Still, for security reasons a metal hook would be better. And don't drive around with it. Trunks are usually closed for a reason.

Works for:

  • VW Caddy 4
  • VW T6

Possibly other cars as well.

I used toughPLA. ASA and PETG should work fine. PLA might be too brittle.

90% infill or more, 5+ walls.

Tagi