9.1 Bambu AMS Hub Flat Mount Left Side Relocation Bracket with Standoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
9.1 Bambu AMS Hub Flat Mount Left Side Relocation Bracket with Standoff for Better PTFE Tube alignment that was causing
- Ocena
- 4 / 5
- Polubienia
- 48
- Pobrania
- 206
- Wydruki
- 3
- Wyświetlenia
- 2304
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE 3MF is Required in this model as negative parts are used
Pla or ASA or ABS, it is a little flimsy as PLA but it does work, one in photos is in pla
This will work on EITHER the left panel screws or the rear panel Screws
2 M3 Nuts need for mounting
v9.1 Bambu AMS Hub Flat Mount Left Side Relocation Bracket with Standoff for Better PTFE Tube alignment that was causing some jams,
Heat Insert screw stuff
Brass Hot Melt Insert Nuts SL M3 x D5.0 X L4.0
NOTE: if you put this on the Left Panel Screws you don't need to remove the bracket to remove the rear cover
Want to buy me a Slice of Pizza? http://buymeacoffee.com/TheTexMech