9.1 Bambu AMS Hub Flat Mount Left Side Relocation Bracket with Standoff
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
9.1 Bambu AMS Hub Flat Mount Left Side Relocation Bracket with Standoff for Better PTFE Tube alignment that was causing
- Rating
- 4 / 5
- Likes
- 48
- Downloads
- 206
- Makes
- 3
- Views
- 2,304
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
NOTE 3MF is Required in this model as negative parts are used
Pla or ASA or ABS, it is a little flimsy as PLA but it does work, one in photos is in pla
This will work on EITHER the left panel screws or the rear panel Screws
2 M3 Nuts need for mounting
v9.1 Bambu AMS Hub Flat Mount Left Side Relocation Bracket with Standoff for Better PTFE Tube alignment that was causing some jams,
Heat Insert screw stuff
Brass Hot Melt Insert Nuts SL M3 x D5.0 X L4.0
NOTE: if you put this on the Left Panel Screws you don't need to remove the bracket to remove the rear cover
Want to buy me a Slice of Pizza? http://buymeacoffee.com/TheTexMech