RobBob - The 2 DOF Robot Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RobBob is a 2 degree of freedom robot head that is powered by bevel gears!
- Ocena
- 4,5 / 5
- Polubienia
- 44
- Pobrania
- 292
- Wydruki
- 8
- Wyświetlenia
- 1466
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
RobBob is a 2 degree of freedom robot head that is powered by bevel gears! Spin one knob and robBob's head turns. Turn the knobs together and robBob will tilt his head up and down.
You can add some servo motors and an arduino board to give RobBob some life!
This video show the engineering process behind RobBob
The files are available for both the mechanical version as well as the servo powered version. You can find info on how to make the servo version work here
Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
Print Time: ~6.5hours
Filament Use: ~100g