1 / 2
19mm and 23mm hole jig for router — zdjęcie 1
1 / 2

19mm and 23mm hole jig for router

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A jig for a Makita Router with copy ring, to make 19 and 23mm diameter holes in stuff.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

This is extremely specialized and almost certainly only of interest to maybe 3 other people on the planet.

But.

If you have a Makita router with a 16mm (od) copy ring, and

if you have Makita one handed clamps for a Tracksaw track, and

if you have Fischer DuoPower 10x50 SHS screws+Dübel(english?), and

if you have a 12mm router bit, and

if you want to recess the screws into something so the head is flush with the surface,

You are in luck, and this can save you 10 minutes of FreeCAD use :D

There are 2 files, 19mm is extremely close fitting, and you are really good at woodworking if you can make this work. The other makes a 23mm hole and gives you a bit of wiggle room.

This only gives the desired hole sizes with the exact equipment listed. But, use brain anyway.

I'm not going to write how to use it, if you actually need this, you are basically me, and already used it, so no need to explain.

have fun, good luck, happy building :)

Tagi