19mm and 23mm hole jig for router
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is extremely specialized and almost certainly only of interest to maybe 3 other people on the planet.
But.
If you have a Makita router with a 16mm (od) copy ring, and
if you have Makita one handed clamps for a Tracksaw track, and
if you have Fischer DuoPower 10x50 SHS screws+Dübel(english?), and
if you have a 12mm router bit, and
if you want to recess the screws into something so the head is flush with the surface,
You are in luck, and this can save you 10 minutes of FreeCAD use :D
There are 2 files, 19mm is extremely close fitting, and you are really good at woodworking if you can make this work. The other makes a 23mm hole and gives you a bit of wiggle room.
This only gives the desired hole sizes with the exact equipment listed. But, use brain anyway.
I'm not going to write how to use it, if you actually need this, you are basically me, and already used it, so no need to explain.
have fun, good luck, happy building :)