Buell Tail Tidy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tail tidy for my XB9SX thought it should be cross compatible with XB models
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey there guys,
Wasn't able to find a short tail using the original brake light, so here it is. Is far from being perfect as the scan I borrowed was used for scanning already a modified tail, but it does the trick pretty well!
It fits the original brake light, used 2x4mm insert nuts to hold it in place and 2x4x25mm screws
For holding the plate holder bumper I used 5mm bolts with security nuts
Its made of PETG but I sanded it, primed it and painted it (not necessary in general, but with my machine was a step I wanted to add) and added an inox reinforcement for the subchasis load (see pictures)
I printed it in 2 parts so it was lying flat and with minimal supports on +60º, but there's also the full file uploaded.
4 perimeters
50% cubic subdivisional infill
In a separate link I'll upload the plate/blinkers holder. https://www.printables.com/model/1518518-plate-holder
https://www.printables.com/model/1518530-plate-holder-bumper
Feel free and MORE than welcome to tip me if you feel like, but all in all enjoy the print and upload your make if any! https://ko-fi.com/p3dx3d