1 / 2
In Case of Emergency Break Glass — zdjęcie 1
1 / 2

In Case of Emergency Break Glass

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Peg board mountable "In Case of Emergency Break Glass" display

Ocena
0 / 5
Polubienia
8
Pobrania
46
Wydruki
0
Wyświetlenia
368
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For display in your office or workshop, a flat area to store things.  I set a 10mm socket inside for a maintenance department joke, everybody had a good laugh.

For the clear "glass" I used 1/16" polycarbonate sheet cut to size by making a few passes with a utility knife.  Can be purchased here: https://www.amazon.com/Polycarbonate-Resistant-Plexiglass-Robotics-Industrial/dp/B07VWLCJN6/ 

Cut to 85mm x 105mm to slide right in (slot is 87mmx110mm)

Best printed with MMU or XL using Red and White PLA.  Can be printed single color and letters painted using acrylic paints as well.

Tagi