In Case of Emergency Break Glass
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Peg board mountable "In Case of Emergency Break Glass" display
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For display in your office or workshop, a flat area to store things. I set a 10mm socket inside for a maintenance department joke, everybody had a good laugh.
For the clear "glass" I used 1/16" polycarbonate sheet cut to size by making a few passes with a utility knife. Can be purchased here: https://www.amazon.com/Polycarbonate-Resistant-Plexiglass-Robotics-Industrial/dp/B07VWLCJN6/
Cut to 85mm x 105mm to slide right in (slot is 87mmx110mm)
Best printed with MMU or XL using Red and White PLA. Can be printed single color and letters painted using acrylic paints as well.