1/2" Schedule 40 Clip for LED Seed / Pixel Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clip allows you to mount 5cm LED Seed / Pixel Lights to 1/2" Schedule 40 water pipe
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This clip allows you to mount LED Seed / Pixel Lights to a Schedule 40 PVC water pipe. This can be used to used to create LED Curtains or Matrixes.
The Clip is designed to hold LED Pixels with 5cm spacing, as well as an optional JST connector and heat shrink solder. This clip will mount to 1/2" Schedule 40 PVC pipe.
The R and L clips are mirrored. If you are connecting LED strings in series, you can use the R and L clips to alternate the side that holds the connector wire.
The "Schedule 40 Light Clip" is the standard clip for mounting LED lights and/or a JST connector to a Pipe
The "Schedule 40 Light Clip - with Wire Holder" adds a holder on the opposite side if you wish to run power injection or other wires along the string of lights
The "Schedule 40 Light Clip - with Wire and JST Holder" adds a holder on the opposite side for the JST connector wire if you wish to tuck the wire behind the clip.