1 / 1
SOLDR Flux Bottle with tighter fit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SOLDR Flux Bottle with tighter fit
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some issues with the SOLDR flux syringe, so i adjusted the fit a bit.
I printed it out of transparent PETG, which i also think helps. If doing this, i recommend to force all print speeds down to 30mm/s or similar.
I also designed a very simple cap, if you would prefer to not remove the syringe tip every time. To print this, i recomend spiral vase mode with 0.5mm line width, but YMMV.
