1 / 1
SOLDR Flux Bottle with tighter fit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SOLDR Flux Bottle with tighter fit
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some issues with the SOLDR flux syringe, so i adjusted the fit a bit.
I printed it out of transparent PETG, which i also think helps. If doing this, i recommend to force all print speeds down to 30mm/s or similar.
I also designed a very simple cap, if you would prefer to not remove the syringe tip every time. To print this, i recomend spiral vase mode with 0.5mm line width, but YMMV.
