1 / 5
Scooter/Moped short carburetor inlet (KEIHIN CVK 18) — zdjęcie 1
1 / 5

Scooter/Moped short carburetor inlet (KEIHIN CVK 18)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bellmouth/Velocity stack inlet for a 50cc scooter/moped.

Ocena
0 / 5
Polubienia
4
Pobrania
32
Wydruki
0
Wyświetlenia
182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

A short bellmouth/velocity stack intake for a 50cc scooter (a Piaggio Fly 50cc 4T in my case), has a 30 degree corner adapter to fit under the plastic trim piece to seal up nicely.

I had to rejet the carburetor up about 4 points and it was still running lean at high revolutions, performance might be wonky, i haven't fully tested it yet as of now.

Somewhat high temperature filament is recommended, as it'll be close to the engine, has some parts to make a flat filter but doesn't come with a filter, you'll have to make one yourself or run without a filter.

For filter materials I just used some foam and metal mesh, it'll be fine.

Update 05-01-2024; changed the inlets to short mid and long variants, with a length of 0,75x / 1x / 1,25x diameter respectively.

Tagi