Scooter/Moped short carburetor inlet (KEIHIN CVK 18)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bellmouth/Velocity stack inlet for a 50cc scooter/moped.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
A short bellmouth/velocity stack intake for a 50cc scooter (a Piaggio Fly 50cc 4T in my case), has a 30 degree corner adapter to fit under the plastic trim piece to seal up nicely.
I had to rejet the carburetor up about 4 points and it was still running lean at high revolutions, performance might be wonky, i haven't fully tested it yet as of now.
Somewhat high temperature filament is recommended, as it'll be close to the engine, has some parts to make a flat filter but doesn't come with a filter, you'll have to make one yourself or run without a filter.
For filter materials I just used some foam and metal mesh, it'll be fine.
Update 05-01-2024; changed the inlets to short mid and long variants, with a length of 0,75x / 1x / 1,25x diameter respectively.