Pebblebee Clip Model and Dog Collar Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pebblebee clip holder to fit a dog collar. Also included a model of the clip if you want to model your own.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pebblebee makes a smaller tracker with range similar to Tile with a dog collar holder. The Clip is UWB and has a similar range to Apple Airtags. The Tile has about half the range of an Apple Airtag.
So, if you are on Android and want a pet tracker, the Pebblebee Clip seems to be a good option.
Unfortunately, it appears you can't buy a holder! So, I made one.
Instructions (You will need a very flexible TPU. I used Ninjaflex 85A):
1. Print some test prints with supports, maybe taking this model and chopping it up. I used tree supports, which made it much easier to pull the supports out with some needle nose pliers.
2. You may need a little more vertical clearance between the top and bottom of the supports.
3. Use enough wall loops and infill to make it solid. I printed with a 0.6mm nozzle. So, if you print this with a 0.4mm nozzle you will need to use more than I did.